Installation Instructions for Quiltera Quilt Hanger Clips

Step-by-Step Installation:

1. Mark the Position:

   • Decide where you want to hang your quilt or tapestry.

   • Mark the spots where the screws will go.

2. Drill Holes:

   • Using a drill, make holes at the marked spots on the wall.

   • Ensure the holes are slightly smaller than the anchors.

3. Insert Anchors:

   • Insert the plastic anchors into the drilled holes.

   • Push them in until they are flush with the wall surface.

4. Attach the Quilt Hanger Clips:

   • Position the quilt hanger clip over the anchor, aligning the holes.

   • Insert the screw through the hole in the quilt hanger clip and into the anchor.

   • Tighten the screw using a screwdriver until the clip is securely fastened to the wall.

5. Hang the Quilt:

   • Slide your quilt or tapestry between the curved section of the hanger clip.

   • Adjust as needed to ensure it hangs evenly and securely.

6. Repeat for Additional Clips:

   • If your quilt or tapestry requires multiple clips for even support, repeat the above steps for each clip.

Your quilt or tapestry is now securely displayed, thanks to the transparent and durable Quiltera quilt hanger clips!